Remote Calibration Module

GTWlabs offers an innovative re-calibration solution for CiDRA SONARtrac flow meters. A full flow meter recalibration is possible without removal of the meter from the pipe. It is possible for the recalibration to be certified to ISO 17025 and/or 10 CFR 50 Appendix B. This new recalibration solution saves time & money for future periodic calibrations following an initial laboratory calibration through the use of our proprietary Remote Recalibration Module.
‍

See Brochure
RCM image
RCM image
RCM image
RCM image
RCM imageRCM imageRCM imageRCM image

Key Features

  • The module is used to record and store data during the flow meter’s initial laboratory calibration.
  • Recorded data is later injected back into the SONARtrac for future periodic calibrations.
  • These recalibrations can be performed quickly without removing the SONARtrac from service.
  • It eliminates downtimes and recalibration costs associated with removal, sending flow meters to calibration labs and subsequent reinstallation.
  • This solution does not require modifications to your existing or new SONARtrac.
  • The RCM may be ordered to be permanently installed with the SONARtrac or only attached during recalibration.
  • The initial calibration data may be stored in a storage media (USB Stick or SDcards), network location or in the cloud.
  • Recalibration can be performed at the installation site or remotely from a centralized cloud location.