Static Leakrate Monitor Plus

This unit has two flow ranges and two pressure channels. The SLM+ quantifies the component’s leakage rate by maintaining a constant gas pressure against the barrier being tested while measuring the gas flow rate needed in order to maintain that pressure constant. SLM+ is designed for instances where lower flow rates are observed. Using two ranges, a 25 to 1 turn-down ratio on each range is achieved with a 1% of full scale accuracy over each of the two ranges. Full scale flow ranges up to 20 slpm may be ordered.
‍

See Brochure
SLM+ image

Key Features

Auto Ranging

  • Automatic control
  • Internal solenoid for switching ranges

Data Recording

  • USB enabled data recording
  • Customizable reports

Portable & Compact

  • Lightweight design

Other Features

Typical Specifications

Power

24 VDC

Pressure

(Customizable)

Max. Supply Pressure: 150 psig
Max. Test Pressure: 100 psig
Accuracy: ±0.5% of Full Scale

Flow

(Customizable up to 20slpm Full Sacle
and down to 20sccm Full Sacle)

Low Flow Range: 8 - 200 sccm
High Flow Range: 0.2 - 5 slpm
25 to 1 turn-down ratio on each range
Accuracy: ±1% of Full Scale

Other Pneumatic Leak Rate Systems

ALTS

Aircraft Leak Test System

ALTS is an easy-to-use & portable leak test system designed to perform leak rate tests of aircraft fuselages and components.
ALTS - Aircraft Leak Test System
Learn More

SLM

Static Leakrate Monitor

The SLM is an economical unit used to measure a component's pneumatic leakage rate while under pressure using either the flow make-up or the pressure decay methods. This single range monitor may be either wall or battery operated. Color touch screen-controlled operation with data logging.
SLM - Static Leakrate Monitor
Learn More